Power Switch Assembly - HP EliteDesk 800 G1 Tower Service Manual

Power switch assembly

Description
Power switch assembly
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Rotate the drive cage to its upright position.
5.
Disconnect the cable from the system board connector labeled PB/LED.
132 Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 96).
95).
Spare part number
732756-001
94).