Front Bezel Security - HP EliteDesk 800 G1 Tower Service Manual

Front bezel security

The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1. Prepare the computer for disassembly
2.
If the computer is on a stand, remove the computer from the stand.
3.
Remove the access panel
4.
Remove the front bezel
5.
Remove one of the five silver 6-32 standard screws located on top of the drive cage.
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 96).
95).
94).
Front bezel security
97