Drive cage
Description
Optical disc drive mounting cage
The drive cage sits behind the USB ports on the front of the chassis.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the optical drive
4.
Remove the hard drive
5.
Remove the two Torx screws that secure cage to the chassis (1), lift the tab (2) on the cage, slide
the cage toward the rear of the unit (3), and then pull the cage up and out of the chassis.
To install the drive cage, reverse the removal procedures.
164
Chapter 7 Removal and replacement procedures: Ultra-slim Desktop (USDT)
(Preparation for disassembly on page
(Access panel on page
(Removing the optical drive on page
(Hard drive on page
154).
142).
151).
Spare part number
732761-001
141).