HP EliteDesk 800 G1 Tower Service Manual page 198

Table 8-3
Device Security
USB Security
Slot Security
Network Boot
System IDs
186 Chapter 8 Computer Setup (F10) Utility
Computer Setup—Security (continued)
Allows you to set Device Available/Device Hidden (default is Device Available) for:
Embedded security device
●
System audio
●
USB controller (varies by model)
●
Network controller
●
NOTE: You must disable AMT before trying to hide the network controller.
Serial port
●
Parallel port
●
SATA ports (varies by model)
●
Allows you to set Enabled/Disabled (default is Enabled) for:
Front USB Ports
●
Rear USB Ports
●
Accessory USB Ports
●
Allows you to disable any PCI or PCI Express slot. Default is enabled.
Enables/disables the computer's ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.) Default is enabled.
Allows you to set:
Asset tag (18-byte identifier), a property identification number assigned by the company to the
●
computer.
Ownership tag (80-byte identifier) displayed during POST.
●
Universal Unique Identifier (UUID) number. The UUID can only be updated if the current
●
chassis serial number is invalid. (These ID numbers are normally set in the factory and are used
to uniquely identify the system.)
Keyboard locale setting for System ID entry.
●