7.3 Configuration Mode
Some of the software loading, and all of the configuration settings are performed in the configuration
mode. To enter configuration mode, hold down the left-hand softkey (softkey #1) while powering on the
GDU 37X. In a two-display system hold down softkey #1 on the PFD.
7.4 Configuration Pages
The Configuration pages (MAIN, GSU, ACFT, W/B, UNITS, DSPL, SOUND, COMM, GPS, ENG) are
only available in Configuration mode.
G3X Installation Manual – Software, Configuration, Databases, and XM Activation
Page 7-5
190-01115-01
Revision E