Acft Configuration Page - Garmin G3X Installation Manual

7.4.2 GSU Configuration Page
If an SD card is inserted into the GDU 37X, a SAVE LOG softkey is displayed at the bottom of the GSU
Page. Pressing this softkey writes GSU log data to the Garmin\Diag directory on the SD card. This data
may be requested by Garmin Product Support during GSU troubleshooting.
See Sections 7.2.2 (GSU SW loading procedure) , 8.3 (GSU 73/GMU 44 Calibration), and 9.6
(Calibration Procedures) for further information regarding the GSU Configuration Page.

7.4.3 ACFT Configuration Page

The Aircraft Configuration Page allows setting the parameters for Reference Speeds and Flight Planning.
The aircraft identifier and map symbol can also be entered on this page.
Reference Speeds–The aircraft Vspeeds can be entered using the FMS Joystick. A label can be added to
the Custom (1-4) reference speed fields. The entered label text will be displayed on the airspeed tape (in
normal mode) at the entered speed. If no text is entered for the label, a small triangle will appear instead.
To clear a reference field:
1. Highlight the desired reference speed field.
2. Press the CLR key, or set the speed to 0.
To clear a label field:
1. Highlight the desired label field.
2. Press the CLR key.
Flight Planning–The flight planning fields let you adjust the default values (cruise speed and fuel flow)
used in normal mode for flight planning calculations (ETE, Leg Fuel, etc.).
Aircraft Identifier–The aircraft identifier is used in the data log file and on the Flight Log page, it can be
entered using the FMS Joystick.
Map Symbol–The aircraft symbol that is displayed on the Map page can be selected.
The aircraft symbols are stored as .srf files located in the 'Garmin/Vehicle/' directory on
the SD card(s). For installations with multiple GDUs, the .srf file must be present on
each SD card inserted into each of the GDUs. If the file is not present, the GDU will use
the default black-and-white airplane symbol.
1. In configuration mode, use the FMS Joystick to select the ACFT Page.
G3X Installation Manual – Software, Configuration, Databases, and XM Activation
190-01115-01
NOTE
Page 7-7
Revision E