Garmin G3X Installation Manual page 125

8.3.1 Common Configuration Options
Many of the items listed in the Engine/Airframe Input Configuration section of the Engine Configuration
Page have the same (or similar) configuration options, this section describes those similar configuration
options.
Gauge Configuration – Nearly all of the configuration options (except Discrete 1– 4, Engine Time, &
Total Time) have a Gauge Marking and a Gauge Display Range section. These gauge options are
uniform for all applicable items and are described below.
Gauge Markings – Used to select the desired color displayed on the applicable gauge. The Yellow
Range + Alert and Red Range + Alert settings will issue a CAS (Crew Alerting System) on-screen alert
anytime the value is within that range. The Red Range + Alert settings will issue a CAS audible and on-
screen alert anytime the value is within that range The following are the available gauge marking
options:
White Range
Yellow Range
Red Range + Alert
Green Line
Gauge Display Range – The Gauge Display Range allows for setting the minimum and maximum values
of each gauge.
G3X Installation Manual – Engine Sensor Installation and Configuration
190-01115-01
Cyan Range
Yellow Range +Alert
Tick Mark
Yellow Line
Green Range
Red Range
Cyan Line
Red Line
Page 8-21
Revision E