Garmin G3X Installation Manual page 256

APPENDIX F EXTERNAL INTERFACE DRAWINGS (EXAMPLE ONLY)
GNS 430(W)/530(W)
P4001/5001
ILS / GPS APPROACH
MAIN LATERAL DEV +RIGHT
MAIN LATERAL DEV +LEFT
MAIN VERT DEV +UP
MAIN VERT DEV +DN
GDU 37X
P3701
RS-232 OUT 1
GSU 73
P731
ARINC 429 OUT 2A
ARINC 429 OUT 2B
AUTOPILOT INTERCONNECTS SHOWN FOR REFERENCE ONLY. AUTOPILOT VENDOR
DOCUMENTATION SHOULD BE CONSULTED FOR PROPER PIN CONNECTIONS.
CONFIGURATION GUIDANCE
1. TRUTRAK GX PILOT
A.ON THE GDU 37X COMM CONFIG MODE PAGE
SET CONNECTED GDU 37X RS-232 CHANNEL FORMAT TO "INTEGRATED AUTOPILOT"
SET GSU ARINC 429 TX 2 FORMAT TO "AUTOPILOT"
2. TRUTRAK DIGIFLIGHT II SERIES / TRIO AVIONICS PRO PILOT
A.ON THE GDU 37X COMM CONFIG MODE PAGE
SET CONNECTED GDU 37X RS-232 CHANNEL FORMAT TO "NMEA OUT"
SET GSU ARINC 429 TX 2 FORMAT TO "AUTOPILOT"
2. TRUTRAK DIGITRAK / PICTORIAL PILOT / ADI OR TRIO AVIONICS EZ PILOT
A.ON THE GDU 37X COMM CONFIG MODE PAGE
SET CONNECTED GDU 37X RS-232 CHANNEL FORMAT TO "NMEA OUT"
FOR INTEGRATED AUTOPILOT INSTALLATIONS: BEFORE ATTEMPTING TO CONTROL AUTOPILOT MODES ON THE
G3X DISPLAY, OPERATION OF THE AUTOPILOT INDEPENDENT OF THE G3X SYSTEM (I.E. USING THE AUTOPILOT
CONTROL HEAD) SHOULD BE CONDUCTED TO DETERMINE SUITABLE AUTOPILOT GAIN SETTINGS.
Page F-6
Revision E
14
22
21
S
27
28
S
48
S
22
23
S
Figure F-1.5 Auto Pilot Examples Page 2 of 2
NOTE
G3X Installation Manual – External Interface Drawings
TRU TRAK AFCS
SORCERER/DFC SERIES
P101
29 LOCALIZER MODE SIGNAL
22 CDI RIGHT
21 CDI LEFT
24 GS UP
23 GS DN
25 PRIMARY SERIAL INPUT
26 ARINC A
27 ARINC B
190-01115-01