Html Operation; Opening The Embedded Web Pages - Extron electronics DMS 1600 User Manual

HTML Operation

This section describes the operation of the DMS 1600 and DMS 3600 via their embedded
web pages, including:
•
•
•
•
•
•
The switcher can be controlled and operated through its LAN port, connected via a LAN or WAN,
using a web browser such as Microsoft Internet Explorer
operation of the switcher has the appearance of web pages. This chapter describes the
factory-installed HTML pages, which are always available and cannot be erased or overwritten.
NOTE:

Opening the Embedded Web Pages

Access the switcher using HTML pages as follows:
1.
2.
3.
4.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Opening the Embedded Web Pages
Status Tab
Configuration Tab
File Management Tab
Control Tab
Special Characters
If your Ethernet connection to the matrix switcher is unstable, try turning off the
proxy server in your web browser. In Internet Explorer, click Tools > Internet
Options > Connections >
server... box, and then click OK.
Start the web browser program.
Click in the field of the browser.
Address
Enter the matrix IP address in the
NOTE: If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (/) and the file name to open.
NOTES: •
The
Address field
following format: xxx.xxx.xxx.xxx/{optional_file_name.html}.
•
The following characters are invalid or are not recommended in file
names: {space} + ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
. The display of the status or
®
, uncheck the Use a proxy
LAN Settings
field of the browser.
Address
of the browser should display the address in the
86