Scanning
4
Enter a shortcut number.
Note: If you enter a number that is already in use, then you are prompted to select another number.
5
Click Add.
Creating an FTP shortcut using the scanner control panel
1
From the scanner home screen, navigate to:
FTP > FTP > type the FTP address >
2
Verify that the shortcut name and number are correct, and then touch OK.
Notes:
•
If the name or number is incorrect, then touch Cancel, and then reenter the information.
•
If you enter a number that is already in use, then you are prompted to select another number.
Scanning to an FTP address
Scanning to an FTP address using the scanner control panel
1
Load an original document facedown, long edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the scanner control panel, navigate to:
FTP > FTP > type the FTP address > Done > Send It
Scanning to an FTP address using a shortcut number
1
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
Press
, and then enter the FTP shortcut number.
4
Touch Send It.
> type a name for the shortcut > Done
120