Copy guide
Making a quick copy
1
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the scanner control panel, touch Copy It.
Copying using the ADF
1
Load an original document facedown into the ADF.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > change the copy settings > Copy It
Copying using the scanner glass
1
Place an original document facedown on the scanner glass in the lower left corner.
Note: Make sure the edge of the document is aligned with the edge of the scanner glass.
2
From the home screen, navigate to:
Copy > specify the copy settings > Copy It
3
If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page.
4
Touch Finish the Job to return to the home screen.
Copying film photos
1
Place a photo facedown on the lower left corner of the scanner glass.
2
From the home screen, navigate to:
Copy > Content > Photo >
3
Touch Scan the Next Page or Finish the Job.
> Photo/Film >
> Copy It
Copy guide
Page 1 of 4