Table of Contents
Advertisement
Maintenance Menu
1
Click "System Configuration" on the Library Administration Menu, then
click "Password".
The "Password" page appears.
2
In the "Old Password" box, enter the current password.
If you are setting the password for the first time, enter "LIB-
162A".
3
In the "New Password" box, enter the new password up to eight
alphanumeric characters and symbols (! @ # $ % ( ) - { } ~ ").
4
In the next "New Password" box, re-enter the same password.
5
Click "Submit".
A message that indicates the completion of setting is
displayed.
Caution
The maximum number of characters that can be set for the password is
eight. When more than eight characters are entered and "Submit" is clicked,
an error message appears.
In the Maintenance Menu, the condition of the AIT library can be checked, and
the firmware of this library can be updated.
Chapter 6 Using the Library Administration Menu
72
Advertisement
Table of Contents
