Table of Contents
Advertisement
Error Code List
When an error occurs in the AIT library, an error code appears on the LCD
panel. The following is a list of error codes that are displayed on the LCD panel.
When an error code appears, contact your dealer.
Changer Manager Errors
Error code
Description
01000031
An internal error occurred in the library.
01000032
An internal error occurred in the library.
01000033
Access attempted to a non-existent AIT drive.
The AIT drive may not be connected correctly.
01000034
The AIT library contains more cartridges than can be held
by the cartridge case.
Remove extra cartridges from the library.
01000041
Fan malfunction.
01000043
The wrong type of drive is installed.
NVRAM Driver Error
Error code
Description
02000001
An internal error occurred in the library.
Mechanical Manager Error
(Byte2:Axis, Byte1:Class, Byte0:SubClass)
Error code
Description
03010101
HandAxis Timeout occurred during Close Sensor Low
03010201
HandAxis Timeout occurred during Open Sensor Low
03010901
Hand sensor malfunction.
03020101
Y-Axis Timeout occurred during Origin Sensor Low Wait.
03020102
Y-Axis Timeout occurred during Origin Sensor High
03020301
Y-Axis Encoder did not stop when bumper reached.
03020401
Y-Axis The bumper measurement is incorrect.
03020501
Y-Axis Destination not reached.
03020601
Y-Axis Fine tuning not possible.
03020701
Y-Axis Cartridge cannot be removed.
03030101
X-Axis Timeout occurred during Origin Sensor Low Wait.
03030102
X-Axis Timeout occurred during Origin Sensor High
03030301
X-Axis Encoder did not stop even when bumper
03030401
X-Axis Bumper measurement is incorrect.
03030501
X-Axis Destination not reached.
03030601
X-Axis Fine tuning not possible.
03040101
ElevatorAxis Timeout occurred during Origin Sensor Low
Wait.
Wait.
Wait.
Wait.
reached.
Wait.
88
Appendix
Advertisement
Table of Contents
