Table of Contents
Advertisement
Moving the Cartridges
Be sure to insert it all the way.
"Insert Tape?" appears.
13
To set another cartridge, press the v
or V button, then press the
[ENTER] button.
The element address settings
display reappears. Insert the
cartridge in the same manner as
above.
14
When all the cartridges are set,
press the B button, then press the
[ENTER] button.
The shutter closes and the LED dims.
15
Press the [CANCEL] button twice to return to the status display.
A cartridge that is already set can be moved to a different slot or to the AIT
drive. When moving a cartridge, specify the slot with the element address. For
information about element addresses, refer to "Assigned Element Addresses"
(page 45) in Chapter 3, "Basic Usage".
1
At the status display, press the [MENU] button for 0.5 second.
R
T E
E N
N U
M E
Insert Tape
Library 01
Insert Tape?
to set
to exit
to set
Insert Tape
Library 01
Insert Tape?
to set
to exit
to set
[ENTER] to activate
Insert Tape
Library 01
Insert Tape?
to set
to exit
to set
[ENTER] to activate
Chapter 4 Operating the AIT Library
R
R O
E R
E L
N C
C A
12:34
12:34
12:34
53
Advertisement
Table of Contents
