System Structure
Cartridges
AIT Cartridge
Generally, the library is connected to the host computer and used to control the
library from the host computer. Also, you can connect the library to the network
so that it can be configured and maintained through a browser.
Control the
library.
Wide SCSI
Host computer
Notes
• A SCSI host adapter card must be installed in the host computer.
• In order to configure and maintain the library through a browser, browser
software must be installed in the computer. Operating systems and browsers
that are compatible with this library are as follows.
Operating systems:
- Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows Me,
and Microsoft Windows 2000
Browsers:
- Microsoft Internet Explorer 5.01 or later
- Netscape Communicator 4.7 or later
This section describes used in the AIT library.
AIT cartridges for AIT-3, AIT-2 and AIT-1 drives can be used in the AIT
library. To achieve the maximum transfer rate and recording capacity, use the
optimum cartridges for the type of AIT drive installed. For information on
recording capacities, refer to "Hardware Specifications" (page 85) in the
"Appendix" chapter.
Make library settings and
perform maintenance.
Ethernet
LIB-162
11
Chapter 1 Introduction