Table of Contents
Advertisement
Life Count
The following items are in the Maintenance Menu.
• Life Count
Displays the number of times a specific part has been operated.
• Error Count
Displays the number of times an error has occurred in a specific part.
• Sensor
Displays information about the individual sensors, DIP switches and encoder
values.
• History
Logs can be viewed.
• Diagnostic
You can check whether or not the AIT library is functioning normally.
• Firmware Upload
The firmware of the AIT library can be updated.
In "Life Count", the number of times a specific part has been operated is
displayed.
1
In the Library Administration Menu, click "Maintenance".
The "Life Count" page appears.
In the "Life Count" page, the numbers of times the following
specific parts have been operated are displayed.
• Elevator
• Slider
• Picker
• Hand
• Turn Table
• Shutter
• Drive 1 (R)
• Drive 2 (L)
Chapter 6 Using the Library Administration Menu
73
Advertisement
Table of Contents
