Library Administration Menu - Sony LIB-162 Operating Instructions Manual

Ait library

Hide thumbs Also See for LIB-162:

Table of Contents

Library Administration Menu

When the Library Administration Menu is accessed using a browser, the

following objects can be accomplished through the browser:

• Configure system-related settings

• Configure network-related settings

• Configure SCSI ID-related settings

• Set or change the password

• Update the firmware

• Check the operation condition

• Check the AIT library

• View the AIT library and AIT drive information

• View logs

Use the browser to operate the Library Administration Menu.

Launch a browser on a client computer.

Enter "http://XXX.XXX.XXX.XXX/" in the "Address" or "Location"

field.

For "XXX.XXX.XXX.XXX", enter the IP address set in the server.

(e.g., 192.168.0.1)

Note

If the IP address assigned by a DHCP server is being used, enter the current

IP address in the "Address" field of the browser, and then click "Submit".

The current IP address can be checked with "Network" on the Configuration

Menu. For Information about how to check, refer to "Operation example"

(page 37) in "Control Buttons" in Chapter 3, "Basic Usage".

The top page of the Library Administration Menu appears.

Chapter 6 Using the Library Administration Menu

Table of Contents