Table of Contents
Advertisement
Move Tape Menu
Password Menu
Control Buttons
This menu moves the cartridges.
t "Replacing the Cartridges" (page 50) in Chapter 4, "Operating the AIT
Library".
A password can be assigned to the AIT library. The password is used when
accessing certain menus via Ethernet.
t "Setting or Changing the Password" (page 39) of this chapter.
The following buttons are on the control panel. Use these buttons to operate the
Control Panel Menu.
[MENU] button
The Control Panel Menu appears.
b button, B button
Moves the cursor left and right. These buttons are used to select values and to
specify positions of the letters and numbers to set.
v button, V button
These buttons are used to select a menu and to input letters and numbers.
• Press v to move to the previous menu, and V to move to the next menu.
• Press v to cycle forward through letters and numbers one at a time, and V to
cycle backwards.
[ENTER] button
This button is used to finalize the displayed menu or value, and to execute the
operation.
• Finalizes or executes the displayed menu or operation.
• Saves the values.
• Input a space (" ") to delete unwanted character.
[CANCEL] button
Aborts the current operation and returns to the previous menu.
(Operation example) Set the host name
1
When the server is in the normal standby state, press the [MENU] button
for 0.5 second.
2
Press the V button twice to select
"3.Network", then press the
[ENTER] button.
Menu
1.Information
2.Configuration
3.Network
4.SCSI
5.Tape Inventory
6.Eject/Insert Tape
Chapter 3 Basic Usage
12:34
37
Advertisement
Table of Contents
