Table of Contents
Advertisement
Warnings
"Network" appears, and a cursor is
displayed on the first character of
the host name.
3
Use the V button and v button to input the first character.
4
Press the B button to move the cursor to the next character, then input the
character.
5
Repeat Step 5 to input the rest of the
characters.
6
Press the [ENTER] button.
7
Press the [ENTER] button several
times until "[ENTER] to activate"
appears, then press the [ENTER]
button.
Host name is now set, and the
display returns to "Network".
8
Press the [CANCEL] button to return to the status display.
When the AIT drive needs cleaning or a specific part needs to be replaced upon
reaching its periodic replacement time, a warning message is displayed on the
LCD panel.
Warning
Cleaning Request
The warning messages and their solutions are as follows:
"Cleaning Request":
The AIT drive needs to be cleaned.
Network
Host
LIB-162
Network
Host
MACHINE-NAME
Network
DHCP YES
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
[ENTER] to activate
12:34
12:34
12:34
12:34
38
Chapter 3 Basic Usage
Advertisement
Table of Contents
