1-9. Setting Switch on the Connector
Panel
Set the following switch on the connector panel when
installing the unit.
For setting the switch, refer to "Section 2 Names and
Functions of Each Part" in the Operation Manual.
. 75 Z terminating switch of reference input
1-14 (E)
1-10. Opening/Closing the Control Panel
Opening
1. Press the right and left unlock buttons and then open
the control panel in the arrow direction.
n
The opening level of the control panel can be adjusted in
fi ve steps from vertical position to 72 d in units of approx.
18 d.
Unlock button
Unlock button
Control panel
Control panel
Closing
1. Close the control panel while lifting the right and left
stays gently with index fi ngers as shown in the fi gure.
n
When closing the control panel completely, be careful not
to catch the control panel cable.
Unlock button
Unlock button
Stay
Stay
SR-R1000