Stack The Prints With An Offset - Canon imagePRESS C7011VPS series Operation Manual
Hide thumbs
Also See for imagePRESS C7011VPS series:
- Operation manual (391 pages) ,
- Service manual (121 pages)
Table of Contents
Advertisement
Stack the prints with an offset
Stack the prints with an offset
Introduction
The [Offset stacking] function creates a visible distinction between sets or jobs in an output
location. The active workflow profile or the active automated workflow determines the default
type of offset stacking. The table below describes the possible types of offset stacking.
Furthermore, the table describes when you can change the defined type of offset stacking in the
[Properties] window.
Types of offset stacking
Default type of offset
stacking
[Jobs]
[Sets (always)]
NOTE
When [Sets (always)] is possible, the [Properties] window displays a special button at
the upper right-hand side which is otherwise not visible.
[Sets (as in job)]
[Banners]
[Off]
Procedure
1.
Touch [Jobs] -> [Waiting jobs], or select a [DocBox].
2.
Touch the job of which you want to change the type of offset stacking.
NOTE
You can only change the settings of the active print job , after you stopped the printer (press
the [Stop] button
3.
Touch [Properties], or touch the job twice to open the [Properties] window.
4.
Touch the [Print delivery] button when the default type of offset stacking is [Sets (as in job)].
NOTE
You can only change this setting when the default type of offset stacking is set to [Sets (as in
job)].
5.
Make the required changes.
6.
Press [OK].
188
Chapter 8 - Carry out print jobs
Possible changes in the [Properties] window
No changes possible.
You can indicate the number of sets (N sets) after which an offset
will be applied, for example 5.
Then 5 sets will be delivered in a straight stack. The next 5 sets
will also be delivered in a straight stack, but with a shift compared
to the previous stack.
N must be a value between 1 and 65536 (default = 1).
You can set the [Offset stacking] function to:
• [On] - each set will be shifted compared to the previous set, or
• [Off] - all sets are delivered in 1 straight stack.
No changes possible.
No changes possible.
two times).
Advertisement
Table of Contents
