Copy your documents
Make a copy
Introduction
A basic copy is a copy for which you only define a few settings before you touch Start
• 1-sided or 2-sided
• A staple
• The number of copies required.
Before you begin
• Remove staples or paper clips.
• Make sure that the originals in the automatic document feeder have the same size.
• Make sure that the automatic document feeder does not contain more than 100 sheets (80 g/m²
or 20 lb bond).
• Make sure that the originals are not curled.
Procedure
1.
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
2.
Touch [Jobs] -> [Copy/Scan] -> [Copy job].
3.
If required, define the settings and the required number of copies.
4.
Select [Scheduled jobs] in the [Destination] field to start the copy job immediately.
5.
Press
.
The job is added to the list of [Scheduled jobs].
Copy your documents
Chapter 9 - Carry out copy jobs
, such as:
245