Table of Contents
Advertisement
Faxing Problems
Use the following tables to solve problems that can occur when sending
and receiving faxes with the LASER CLASS 2060.
Sending Faxes
Problem
Cannot send a fax?
13-26
Frequently Asked Questions
Possible cause
The LASER CLASS 2060 may
have overheated and shut
itself down.
The LASER CLASS 2060 may
not be set for the type of
telephone line you have
(pulse/tone).
The document may not have
been set correctly in the
Automatic Document Feeder
(ADF).
The one-touch or coded
speed dialing number you
used may not be registered.
The receiving fax machine
may be out of paper.
The LASER CLASS 2060 may
be sending another
document from memory.
An error may have occurred
during sending.
Solution
If you suspect this, unplug
the LASER CLASS 2060 and
let it cool for several
minutes. Then plug it back
in and try sending again.
Make sure the LASER
CLASS 2060 is set for the
type of telephone line you
have. See page 3-12. (If you
are not sure what type of
line you have, contact your
local telephone company.)
Remove the document,
stack it, and feed it into the
Automatic Document
Feeder (ADF) again.
Check the content of the
One-Touch or Coded Speed
Dialing button and make
sure it was registered
correctly. See Chapter 5.
Call the other party and
make sure they have paper
in their fax machine.
Allow time for the current
document to finish sending.
Print an activity report and
check for an error code. See
page 12-2.
Chapter 13
Advertisement
Table of Contents
