What Happens When Fax/Tel Mode Is Selected - Canon Laser Class 2060 User Manual

What Happens When Fax/Tel Mode is Selected

Type of call
Telephone charges
begin for caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting = 15 sec.)
You can select these options in the RX MODE submenu of the RX
SETTINGS menu when Fax/Tel Mode is selected.
7-6
Receiving Faxes
Telephone
LASER CLASS 2060 answers without ringing
LASER CLASS 2060 listens for FAX TONE
(For 8 sec.)
FAX TONE is not detected
LASER CLASS 2060 starts ringing
If you don't pick up the handset
(within 15 sec.)
F/T SW ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a FAX
TONE. For those cases if you set the F/T SW
ACTION to RECEIVE, the LASER CLASS 2060
switches to receive mode automatically and starts
receiving the document. If no document comes in,
it disconnects after approximately 35 seconds.
Fax
Sending document
manually
FAX TONE
detected
Fax
Sending document
automatically
Document received
automatically .
(FAX TONE is detected
and the LASER
CLASS 2060 switches
to receive mode.)
Pick up the
handset to talk.
DISCONNECT
LASER CLASS 2060
disconnects the call.
Chapter 7