Table of Contents
Advertisement
Guidelines for Entering Information
The following section explains how to enter user information into the
LASER CLASS 2060.
N
If you pause while entering information and do not make an entry for
more than 60 seconds, the LASER CLASS 2060 returns to standby
mode and loses all information you had entered up to that point. You
will then have to start again.
If the LASER CLASS 2060 rings while you are entering information,
press the Stop button and lift the handset: The LASER CLASS 2060
will automatically save all the information you have entered up to the
last time you pressed the Stop button.
•
•
•
3-2
Registering Information in the LASER CLASS 2060
If you hear nothing or a slow beep, someone is trying to send a
fax: press the Start/Copy button.
If you hear a voice, you are receiving a normal telephone call.
If your LASER CLASS 2060 is set to receive faxes automatically,
you do not have to press the Stop button. The LASER CLASS
2060 will automatically receive the fax. See Chapter 7, "Receiving
Faxes."
Chapter 3
Advertisement
Table of Contents
