Table of Contents
Advertisement
Cleaning the LASER CLASS 2060
Clean your LASER CLASS 2060 regularly to keep it in good operating
condition.
N
Follow these precautions whenever you clean the LASER CLASS 2060:
When the power cord is disconnected, any documents stored in
memory will be erased if you leave the unit unplugged for one hour
or more. Be sure to plug the unit after cleaning to avoid this
happening. If RECEIVED IN MEMORY appears in the LCD display,
follow the steps on pages 7-12 and 7-13 to print out the document.
If you disconnect the LASER CLASS 2060 while it is waiting to send a
document, you will have to set the LASER CLASS 2060 to send your
document again once you finish cleaning the unit.
Do not use tissue paper, paper towels, or similar materials for
cleaning; they can stick to the components or generate static charges.
Cleaning the LASER CLASS 2060 Exterior
Clean the LASER CLASS 2060's outer casing as follows.
1.
Disconnect the power cord from the LASER CLASS 2060.
2.
Wipe the LASER CLASS 2060's exterior with a clean, soft, lint-free
cloth moistened with water or diluted dishwashing detergent
solution.
C
Never use thinner, benzene, alcohol, or any other organic solvent to clean
the LASER CLASS 2060, as these can damage the LASER CLASS 2060's
surface.
3.
Plug the power cord back in.
14-2
Maintaining Your LASER CLASS 2060
Chapter 14
Advertisement
Table of Contents
