Table of Contents
Advertisement
Memory Sending
Memory sending is a quick and easy way to send a fax. The LASER
CLASS 2060 scans the document into its memory as it dials the fax
number. If the line is free, the LASER CLASS 2060 begins sending the fax
as it scans the rest of the document.
The LASER CLASS 2060 has enough memory to store up to 340 pages
(fewer if the document contains many graphics or particularly dense
text).
Follow the instructions below to send a document with memory sending:
N
Be sure to adjust the document feed lever before loading your document.
See page 6-6 for details.
1.
Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).
2.
Dial the other party's fax number.
6-20
Sending Faxes
Once the document is loaded, the LCD display shows the
following:
If necessary, you can adjust the resolution and contrast. See page
6-13 for details.
You may not be able to use memory sending if the percentage
shown in the MEMORY IN USE display is close to 100%. In this
case, use manual sending via the handset to send your
document.
Use one of the dialing methods described on page 6-17.
If you must first dial a digit to get an outside line ("9" for
example), add a pause after that digit by pressing the Pause
button, as shown in the example above.
M E M O R Y I N U S E
D O C U M E N T R E A D Y
T E L =
9 p 8 3 3 4 7 7 7
0 %
Chapter 6
Advertisement
Table of Contents
