Adjusting The Volume - Canon MF229dw User Manual

Adjusting the Volume

The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or error occurs. You
can set the volume of each of these sounds individually.
1
Press and tap <Menu>.
2
Tap <Preferences>.
3
Tap <Sound Volume Control>.
4
Select a setting.
Setting
<Fax Tone>
<Ring Tone>
<TX Done
Tone>
<RX Done
Tone>
<Scanning Done
Tone>
<Entry Tone>
<Invalid Entry
Tone>
<Warning
Tone>
<Job Done
Tone>
<Energy Saver
Alert>
<Original in
Feeder
Detection
Tone>
5
Use / to set volume, tap <Apply>.
Downloaded from ManualsPrinter.com Manuals
Sound produced during a fax transmission
Sound produced when an incoming fax is received
Sound produced when fax sending is complete
Sound produced when fax receiving is complete
Sound produced when fax document scanning is complete
Confirmation sound each time a key on the operation panel or button
on the display is pressed
Sound produced when an invalid key operation is performed, such as
when you enter a number outside the valid setting range
Sound produced when a paper jam or other error occurs
Sound produced when an operation such as copying or scanning is
complete
Sound produced when the machine enters or exits sleep mode
Sound produced when an original is loaded in the feeder
Description
0KCY-023
Procedure
Go to step 5.
Go to step 5.
Select <On> (produce a tone)
or <Off> (not produce a tone).