Canon MF229dw User Manual page 350

Confirm Entered Fax Number
Select whether to require users to enter the fax number twice when it is entered by using the numeric keys.
Screen for Confirming the Fax Number
Off
On
RX Function Settings
Specify settings for receiving faxes.
ECM RX
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce errors on sent faxes,
see ECM TX.
Off
On
ECM must be enabled on both the machine and the other fax device because error check is performed on both the sending
and receiving devices.
Even when ECM is enabled, errors may occur due to telephone line conditions.
It may take a longer time than usual to process data when ECM is enabled because the error check and corrections are
performed while the data is transmitted.
<Menu>
*1
Incoming Ring
Specify settings for sounding a ring to notify you of incoming faxes. This feature is only available when <Auto> or <Fax/Tel (Auto
Switch)> is selected for the receive mode. Specify how many times the incoming call rings when the machine receives a fax call. You
can also disable the settings to prevent the incoming call from ringing.
Off
On
1 to 2 to 99 (times)
If you use this feature in the <Auto> mode, you need to connect your telephone to the machine beforehand.
<Menu>
the incoming call rings
*1
Remote RX
Downloaded from ManualsPrinter.com Manuals
<Fax Settings> <RX Function Settings>
<Fax Settings> <RX Function Settings>
<Apply>
<ECM RX> <On>
<Incoming Ring> <On>
Displaying the
Specify how many times