Canon MF229dw User Manual page 42

Do not exceed the load limit guide when loading paper
Make sure that the paper stack does not exceed the load limit guide (
When loading envelopes or paper with a logo, see
4
Align the paper guides against the edges of the paper.
Move the paper guides in so they are exactly the width of the paper.
Align the paper guides securely against the edges of the paper
Paper guides that are too loose or too tight can cause misfeeds or paper jams.
5
Lower the dust cover.
When Legal size paper is loaded
The paper guides at the rear edge of the paper will be extended. Open the dust cover extension, then lower the dust cover.
6
Pull out the paper stopper to open.
»
Continue to
Specifying Paper Size and Type
When changing the paper size or type
The factory default settings for paper size and type are <A4> and <Plain (60-90 g/m²)>, respectively. If you load a different size
or type of paper into the machine, make sure to change the settings. If you do not change the settings, the machine cannot print
properly.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
Downloaded from ManualsPrinter.com Manuals
). Loading too much paper can cause paper jams.
Loading Envelopes or Loading Preprinted Paper.