Canon MF229dw User Manual page 380

Hide thumbs Also See for MF229dw:
Table of Contents

Advertisement

Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For more
information about how to change, see the instruction manuals for your networking devices or contact your
manufacturer.
Size/Settings Mismatch
The paper size setting on the operation panel does not match the loaded paper size.
Match the paper size setting specified in <Paper Settings> and the size of the paper that is actually loaded.
To use the loaded paper
Change the setting of <Paper Settings> to match the loaded paper size.
Specifying Paper Size and Type
If printing from a computer, check whether the paper size setting in the printer driver matches the loaded paper size.
To load paper without changing the settings
Load the paper with the size that is set to <Paper Settings>.
Loading Paper
Specifying and registering new destinations is restricted.
Only destinations that are registered in the Address Book can be specified to send a fax or e-mail.
To enter a new destination with the operation panel, or add or edit it in the Address Book, you need to set <Restrict
New Destinations> to <Off>. For more information, contact your Administrator.
Limiting Available Destinations
The amount remaining in the cartridge is very low.
The toner cartridge has reached the end of its life.
Shake the toner cartridge to evenly distribute the toner inside the toner cartridge. If this message does not disappear,
replace the toner cartridge.
Before Replacing the Toner Cartridge
Replacing Toner Cartridges
You can continue printing while this message is displayed, but print quality may deteriorate.
If the machine is receiving a fax, or automatic report output is set, received faxes and reports will be stored in
the machine so that they do not appear faded after they are printed. To continue printing even if the toner is
running low, set <Continue Print. When Near Cart. Life End> to <On>.
The connection with the PC has been lost. Check the connection.
The connection to the computer was lost during a scan.
Check the connection between the machine and the computer.
Preparing to Use the Machine as a Scanner
Downloaded from ManualsPrinter.com Manuals
RX Print Settings

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Mf226dnMf217wMf216n

Table of Contents