Canon MF229dw User Manual page 205

<Custom 2>
*1
A PDF format where characters on the document are scanned as text data and the text can be searched using a computer.
*2
Documents are scanned in black and white only, with no intermediate shades of gray.
To change settings
You can change settings from MF Toolbox.
6
Press .
Scanning starts.
To cancel, tap <Cancel>
You cannot scan while the MF Toolbox setup screen is displayed. Close the screen
before scanning.
When placing documents in the feeder in step 1
When scanning is complete, the save destination folder is displayed on the computer.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedure below.
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
2
Tap <Finish Scan>.
The save destination folder is displayed on the computer.
About the save destination folder
By default, the scanned data is saved to the [Pictures] or [My Pictures] folder. A subfolder named with the scanning date is
created, and the data is saved to that folder.
To change the save destination, see
Downloaded from ManualsPrinter.com Manuals
Color
Configuring Scan Settings in MF Toolbox
<Yes>.
.
Configuring Storing Settings.
300 dpi PDF (searchable) / Standard compression