Canon MF229dw User Manual page 257

4
Tap <Apply>.
IP addresses assigned via DHCP/BOOTP/RARP override the address obtained via Auto IP.
Manually entering an IP address
1
Check that <Auto Acquire> is set to <Off>.
If <On> is displayed, tap <Auto Acquire>, and set both <Select Protocol> and <Auto IP> to <Off>.
2
Tap <Manually Acquire>.
3
Specify the IP address, subnet mask, and gateway address (or default gateway).
Specify the settings in the following order: <IP Address>
Enter each setting using the numeric keys, and tap <Apply>.
Checking whether the settings are correct
Make sure that the Remote UI screen can be displayed with your computer (
available, you can check the connection by using the operation panel (
Testing the Network Connection
1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap <Apply>.
Manager PIN
3
Select <TCP/IP Settings>
4
Enter the IPv4 address of another device on the network, and tap <Apply>.
If a proper connection has been established, the result is displayed as shown above.
LINKS
Setting IPv6 Addresses
Viewing Network Settings
Downloaded from ManualsPrinter.com Manuals
<IPv4 Settings> <PING Command>.
<Subnet Mask> <Gateway Address>.
Starting Remote UI). If a computer is not
Testing the Network Connection).
Setting the System