Adjusting The Volume - Canon MF8580Cdw Manual

Adjusting the Volume

The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or error occurs. You
can set the volume of each of these sounds individually.
1
Press .
2
Use / to select <Preferences>, and press
3
Select <Sound Volume Control>, and press
4
Select a setting, and press
Setting
<Fax Tone> *
*
<Ring Tone>
<TX Done
Tone> *
<RX Done
*
Tone>
<Scanning Done
*
Tone>
<Entry Tone>
<Invalid Entry
Tone>
<Restock
Supplies Tone>
<Warning
Tone>
<Job Done
Tone>
<Energy Saver
Alert>
*
Only available for the MF8580Cdw / MF8550Cdn / MF8280Cw.
5
Use / to adjust the volume, and press <Apply>.
6
Press to close the menu screen.
Downloaded from ManualsPrinter.com Manuals
.
Description
Sound produced during a fax transmission
Sound produced when an incoming fax is received
Sound produced when fax sending is complete
Sound produced when fax receiving is complete
Sound produced when fax document scanning is complete
Sound produced each time a key on the operation panel is
pressed
Sound produced when an invalid key operation is performed,
such as when you enter a number outside the valid setting
range
Sound produced when a toner cartridge is almost empty
Sound produced when a paper jam or other error occurs
Sound produced when an operation such as copying or
scanning is complete
Sound produced when the machine enters or exits sleep mode
.
.
0ALJ-023
Procedure
<On> (Sound is produced)
to step 5
<Off> (No sound is produced)
Go to step 6
<On> (Sound is produced)
to step 5
<Off> (No sound is produced)
Go to step 6
<Only When Error Occurs>
to step 5
<On> (Sound is produced) or <Off>
(No sound is produced)
step 6
Go
Go
Go
Go to