CHAPTER 5 PARAMETERS
Advanced Function Setting Level
Input digital filter
• Sets the time constant of the input digital filter. The following figure shows the effect
on data after passing through the digital filter:
Function
Setting
Additional PV display
• This parameter adds the facility of displaying only the PV . It is addes to the top of the
operation level. It is used to give the option of displaying the PV and SP or just the
PV only.
Function
Setting
5–32
PV before passing through filter
A
Time
constant
Input digital filter
Setting Range
Unit
0.0 to 999.9
Second
Setting Range
: Displayed /
: Not displayed
PV after passing through filter
0.63A
Time
Default
0.0
Default