On/Off Control; Setup - Omron E5GN User Manual

CHAPTER 3 BASIC OPERATION
Parameters
JSetup
• Setting the PID / ON/OFF parameter
Operation Procedure
Operation level
PV
Initial setting level
Input type
PID / ON/OFF
• Setting the SP
Operation Procedure
Operation level
PV/SP
3–12
Symbol Parameter Name: Level
PID / ON/OFF:
Initial setting level
Direct/reverse operation:
Initial setting level
Hysteresis:
Adjustment
To execute ON/OFF control, set the set point," PID / ON/OFF" and
hysteresis" parameters.
In this example, let's first check that the PID / ON/OFF" parameter is set
to  " in the initial setting level".
(1) Press the key for at least three seconds to move from the opera
tion level" to the initial setting level".
(2) The input type" is the first parameter displayed when you have
moved to the initial setting level.
(3) Select the PID / ON/OFF" parameter by pressing the
(4) Check that the set value is 
(5) To return to the operation level" press the
second.
Next, set the set point value.
In this example, set the set point value (200). The lower display (No.2 dis
play) shows the set value (SP value).
(1) Select PV/SP" at the operation level.
(2) Use the keys to set the SP value. (For example, 200) To set the
value either press the
Description
For specifying control method
For specifying control method

ON/OFF control

" (default).
key for at least one
key or wait more than two seconds.
key.