Omron E5GN User Manual page 76

MV monitor (OUT2)
This parameter is for monitoring the manipulated variable on the control output 2 side during
operation.
• During heating and cooling control, the manipulated variable on the control output
2 side (OUT 2" terminal output) is monitored.
Function
Heating and cooling
F Related parameters
Standard/heating and cooling" (initial setting level) (p. 5 19)
Manipulated variable display" (advanced function setting level) (p. 5 29)
See
Control Monitor Range
0.0 to 100.0
Operation Level
The control must be heating and cooling con-
trol.
Manipulated variable display must be set to
"ON".
Unit
%
5–9