Figure 28-8 Menu 11.6 For Llc-Based Multiplexing Or Ppp Encapsulation; Figure 28-9 Menu 11.1 Remote Node Profile - ZyXEL Communications Prestige 662HW Series User Manual

28.5.2 LLC-based Multiplexing or PPP Encapsulation
For LLC-based multiplexing or PPP encapsulation, one VC carries multiple protocols with protocol
identifying information being contained in each packet header.
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)

Figure 28-8 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range
for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of
ATM traffic).
28.5.3 Advance Setup Options
In menu 11.1, select PPPoE in the Encapsulation field.
Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name=
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login= ?
My Password= ?
Authen= CHAP/PAP
Remote Node Configuration
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
ENTER here to CONFIRM or ESC to CANCEL:
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:

Figure 28-9 Menu 11.1 Remote Node Profile

Prestige 662HW Series User's Guide
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= Yes
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 0
28-9