Figure 18-12 Menu 11.6 For Llc-Based Multiplexing Or Ppp Encapsulation; Figure 18-13 Menu 11.1 Remote Node Profile - ZyXEL Communications Prestige 660R User Manual

Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
ENTER here to CONFIRM or ESC to CANCEL:
.

Figure 18-12 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for the
VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM traffic).
18.5.3 Advance Setup Options
In menu 11.1, select PPPoE in the Encapsulation field.
Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name=
Incoming:
Outgoing:
Move the cursor to the Edit Advance Options field, press [SPACE BAR] to select Yes, then press
[ENTER] to display Menu 11.8 – Advance Setup Options.
Remote Node Configuration
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
Menu 11.1 - Remote Node Profile
Rem Login=
Rem Password= ********
My Login= ?
My Password= ?
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:

Figure 18-13 Menu 11.1 Remote Node Profile

Prestige 660R ADSL 2+ Access Gateway
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= Yes
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 0
Only one set of VPI
and VCI numbers
needs to be
specified.
18-13