Prestige 662HW Series User's Guide
See later sections for examples of installing UPnP in Windows XP and Windows Me as well as an
example of using UPnP in Windows.
18.2.1 Configuring UPnP
From the Site Map in the main menu, click UPnP under Advanced Setup to display the screen shown
next.
The following table describes the fields in this screen.
LABEL
Enable the Universal Plug
and Play (UPnP) Service
Allow users to make
configuration changes
through UPnP
Allow UPnP to pass
through Firewall
Apply
Cancel
18.3 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
18-2
Figure 18-1 Configuring UPnP
Table 18-1 Configuring UPnP
Select this checkbox to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configurator's login screen without entering
the Prestige's IP address (although you must still enter the password to
access the web configurator).
Select this check box to allow UPnP-enabled applications to automatically
configure the Prestige so that they can communicate through the Prestige, for
example by using NAT traversal, UPnP applications automatically reserve a
NAT forwarding port in order to communicate with another UPnP enabled
device; this eliminates the need to manually configure port forwarding for the
UPnP enabled application.
Select this check box to allow traffic from UPnP-enabled applications to
bypass the firewall.
Clear this check box to have the firewall block all UPnP application packets
(for example, MSN packets).
Click Apply to save the setting to the Prestige.
Click Cancel to return to the previously saved settings.
DESCRIPTION
UPnP