Figure 33-14 Filtering Ethernet Traffic; Figure 33-15 Filtering Remote Node Traffic - ZyXEL Communications Prestige 662HW Series User Manual

Prestige 662HW Series User's Guide
default filter set, NetBIOS_LAN, is inserted in the protocol filters field under Input Filter Sets in
menu 3.1 in order to prevent local NetBIOS messages from triggering calls to the DNS server.
Press ENTER to Confirm or ESC to Cancel:
33.7.2 Remote Node Filters
Go to menu 11.5 (shown next) and type the number(s) of the filter set(s) as appropriate. You can
cascade up to four filter sets by typing their numbers separated by commas. The factory default filter
set, NetBIOS_WAN, is inserted in the protocol filters field under Call Filter Sets in menu 11.5 to
block local NetBIOS traffic from triggering calls to the ISP.
Note that call filter sets are visible when you select PPPoA or PPPoE encapsulation.
33-14
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters= 3
device filters=
Output Filter Sets:
protocol filters=
device filters=

Figure 33-14 Filtering Ethernet Traffic

Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 6
device filters=
Output Filter Sets:
protocol filters= 2
device filters=
Call Filter Sets:
Protocol filters=
Device filters=
Enter here to CONFIRM or ESC to CANCEL:

Figure 33-15 Filtering Remote Node Traffic

Filter Configuration