Figure 41-3 Applying Schedule Set(S) To A Remote Node (Pppoe) - ZyXEL Communications Prestige 662HW Series User Manual

FIELD
Action Forced On means that the connection is maintained whether or not there is
a demand call on the line and will persist for the time period specified in the
Duration field.
Forced Down means that the connection is blocked whether or not there is
a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand call
on the line. Disable Dial-On-Demand means that this schedule prevents a
demand call on the line.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel"
to save your configuration or press [ESC] to cancel and go back to the previous screen.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter
11 from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select
PPPoE or PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets
field available as shown next.
Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoA
Multiplexing= LLC-based
Service Name= N/A
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login= ChangeMe
My Password= ********
Authen= CHAP/PAP

Figure 41-3 Applying Schedule Set(s) to a Remote Node (PPPoE)

You can apply up to four schedule sets, separated by commas, for one remote node. Change the
schedule set numbers to your preference(s).
Call Scheduling
Table 41-1 Menu 26.1 Schedule Set Setup
DESCRIPTION
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Prestige 662HW Series User's Guide
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= N/A
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 0
EXAMPLE
Forced On
41-3