Configuring Basic Firewall Settings; Figure 12-2 Wan To Lan Traffic; Figure 12-3 Firewall: Default Policy; Table 12-1 Firewall: Default Policy - ZyXEL Communications Prestige 662HW Series User Manual

Prestige 662HW Series User's Guide
12.4.3 Alerts
Alerts are reports on events, such as attacks, that you may want to know about right away. You can
choose to generate an alert when an attack is detected in the Edit Rule screen (select the Send Alert
Message to Administrator When Matched checkbox) or when a rule is matched in the Edit Rule
screen (see Figure 12-5)
e-mail account that you specify in the Log Settings screen (see the chapter on logs).

12.5 Configuring Basic Firewall Settings

Click Firewall and then Default Policy to display the following screen. Activate the firewall by
selecting the Firewall Enabled check box as seen in the following screen.
The following table describes the labels in this screen.
LABEL
Firewall Enabled Select this check box to activate the firewall. The Prestige performs access control and
protects against Denial of Service (DoS) attacks when the firewall is activated.
12-4

Figure 12-2 WAN to LAN Traffic

When an event generates an alert, a message can be immediately sent to an
.

Figure 12-3 Firewall: Default Policy

Table 12-1 Firewall: Default Policy

DESCRIPTION
Firewall Configuration