Figure 60 Ip Alias; Table 49 Ip Alias - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 60 IP Alias

The following table describes the labels in this screen.

Table 49 IP Alias

LABEL
Enable IP Alias 1,
2
IP Address
IP Subnet Mask
RIP Direction
158
DESCRIPTION
Select the check box to configure another DMZ network for the ZyWALL.
Enter the IP address of your ZyWALL in dotted decimal notation.
Note: Make sure the IP addresses of the LAN, WAN and DMZ are
on separate subnets.
Your ZyWALL will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the ZyWALL.
RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The RIP Direction field controls
the sending and receiving of RIP packets. Select the RIP direction from Both/In
Only/Out Only/None. When set to Both or Out Only, the ZyWALL will broadcast
its routing table periodically. When set to Both or In Only, it will incorporate the
RIP information that it receives; when set to None, it will not send any RIP packets
and will ignore any RIP packets received.
Chapter 8 DMZ Screens