Table 104 Port Triggering
LABEL
Trigger
Start Port
End Port
Apply
Reset
Chapter 17 Network Address Translation (NAT)
DESCRIPTION
The trigger port is a port (or a range of ports) that causes (or triggers) the ZyWALL to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 35 User's Guide
309