ZyWALL 35 User's Guide
31.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
Figure 251 Menu 5: TCP/IP Setup
From menu 5, select the submenu option 2. TCP/IP Setup and press [ENTER]. The screen
now displays Menu 5.2 - TCP/IP Setup
Figure 252 Menu 5.2: TCP/IP Setup
The TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP Ethernet Setup.
Each public server will need a unique IP address. Refer to
information on how to configure these fields.
Note: DMZ and LAN IP addresses must be on separate subnets. You must also
configure NAT for the DMZ port (see
and 15.2.
31.3.2 IP Alias Setup
You must use menu 5.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 5.2.1 - IP Alias Setup, as shown next.
450
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP Setup
Enter Menu Selection Number:
Menu 5.2 - TCP/IP Ethernet Setup
TCP/IP Setup:
IP Address= 0.0.0.0
IP Subnet Mask= 0.0.0.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
,
as shown next.
Section 29.4 on page 438
Chapter 35 on page
for
469) in menus 15.1
Chapter 31 DMZ Setup