Table 2 Web Configurator Home Screen In Router Mode - ZyXEL Communications ZyWall 35 User Manual

Click MAINTENANCE to view information about your ZyWALL or upgrade configuration/
firmware files. Maintenance includes General, Password, Time and Date, Device Mode, F/
W (firmware) Upload, Configuration (Backup, Restore, Default), and Restart.
The following table describes the labels in this screen.

Table 2 Web Configurator HOME Screen in Router Mode

LABEL
Wizards for
WAN1 Quick
Setup
Internet Access
VPN Wizard
Device
Information
System Name
Firmware Version This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
Routing Protocol
Device Mode
Firewall
System Time
Memory
Sessions
Policy Routes
Network Status
Chapter 2 Introducing the Web Configurator
DESCRIPTION
Click Internet Access to use the initial configuration wizard. This configures WAN1.
Click VPN Wizard to create VPN policies.
This is the System Name you enter in the MAINTENANCE General screen. It is for
identification purposes.
proprietary Network Operating System design.
This shows the routing protocol - IP for which the ZyWALL is configured. This field is
not configurable.
This displays whether the ZyWALL is functioning as a router or a bridge.
This displays whether or not the ZyWALL's firewall is activated.
This field displays your ZyWALL's present date and time.
The first number shows how many kilobytes of the heap memory the ZyWALL is
using. Heap memory refers to the memory that is not used by ZyNOS (ZyXEL
Network Operating System) and is thus available for running processes like NAT,
VPN and the firewall.
The second number shows the ZyWALL's total heap memory (in kilobytes).
The bar displays what percent of the ZyWALL's heap memory is in use. The bar
turns from green to red when the maximum is being approached.
The first number shows how many sessions are currently open on the ZyWALL.
This includes all sessions that are currently:
• Traversing the ZyWALL
• Terminating at the ZyWALL
• Initiated from the ZyWALL
The second number is the maximum number of sessions that can be open at one
time.
The bar displays what percent of the maximum number of sessions is in use. The
bar turns from green to red when the maximum is being approached.
The first number shows how many policy routes you have configured.
The second number shows the maximum number of policy routes that you can
configure on the ZyWALL.
The bar displays what percent of the ZyWALL's possible policy routes are
configured. The bar turns from green to red when the maximum is being
approached.
ZyWALL 35 User's Guide
61