System Maintenance Menus 8 To 10; Command Interpreter Mode; Command Syntax; Figure 339 Command Mode In Menu 24 - ZyXEL Communications ZyWall 35 User Manual

System Maintenance Menus 8 to
This chapter leads you through SMT menus 24.8 to 24.10.

41.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. Access can be by Telnet or by a
serial connection to the console port, although some commands are only available with a serial
connection. See the included disk or zyxel.com for more detailed information on CI
commands. Enter 8 from Menu 24 - System Maintenance.
Note: Use of undocumented commands or misconfiguration can damage the unit and
possibly render it unusable.

Figure 339 Command Mode in Menu 24

41.1.1 Command Syntax

The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
Chapter 41 System Maintenance Menus 8 to 10
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
C
H A P T E R
ZyWALL 35 User's Guide
4 1
10
535