Figure 15 ISP Parameters : PPTP Encapsulation
The following table describes the labels in this screen.
Table 12 ISP Parameters : PPTP Encapsulation
LABEL
ISP Parameters for
Internet Access
Encapsulation
User Name
Password
Retype to Confirm
Nailed-Up
Idle Timeout
PPTP Configuration
My IP Address
Chapter 3 Wizard Setup
ESCRIPTION
D
Select PPTP from the drop-down list box. To configure a PPTP client, you must
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically disconnects
from the PPTP server.
Type the (static) IP address assigned to you by your ISP.
ZyWALL 35 User's Guide
77