Printing A Configuration Page - Ricoh SP 210 Setup Manual

Printing a Configuration Page

Before you install the software, print the configuration page to check the network information.
SP 212w/SP 212Nw/SP 213w/SP 213Nw
Turn off the power.
While holding the [Stop/Start] key down, switch the power on and do not release the [Stop/Start]
key until 13 seconds elapse.
Check the IP address on the configuration page.
The address appears under Host Interface.
If the IPv4 address is not automatically assigned by the DHCP server, the machine automatically selects
an unused IPv4 address starting with "169.254.xxx.xxx" (Auto IP function).
SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/
SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNw
Press the [User Tools] key.
Press the [ ] or [ ] key to select [Print List/Report], and then press the [OK] key.
Press the [ ] or [ ] key to select [Configuration Page], and then press the [OK] key.
CTT175
DCT845
15